For damaged or faulty goods, please contact us within 48 hours of receipt and we will advise on the course of action to be taken.

This is a 6-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors. The adapter has 150mm red/black leads for connecting to a charger's main output; these leads either have bare ends for you to fit your own connectors or are available fitted with 4mm plugs that are compatible with the sockets on most LiPo chargers. With the development of electronic products, a wide range of connectors are present in electronic equipment. This 12-inch (30-cm) cable has three 26 AWG wires with a 3-pin female JST PH-style connector that matches the connector on Sharp analog distance sensors that have 3 pins (see the sensors - opto section). The JST connector plays the role of conducting current and connecting signal in electronic equipment.

A short adapter lead to allow 2S Lipos with the red JST 2 pin plug to be used with receivers or ESC that have a JST-PH 3 pin socket - e.

Number of contacts varies from 2 to 16 pins • 10mm pitch with 2 circuits and 5mm pitch with 6 circuit housings are also available • Nylon 6, UL94V-0.The protected, folded beam contact in this connector provides high contact pressure with an over-stress stop feature. Skill Level: Noob - Some basic soldering is required, but it is limited to a just a few pins, basic through-hole soldering, and couple (if any) polarized components. This is a handy cable for connecting a six-pin JST GHR-06V type locking connector to breadboard-friendly male pins.

New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging .It features 145mm colour coded power leads terminated with a JST connector at the end and M3 mounting holes in the centre so it can be attached to the back of a micro:bit case. We don’t share your credit card details with third-party sellers, and we don’t sell your information to others.